EN 1149-5 is a European standard that covers performance requirements for protective clothing in the event of electrostatic discharge. Therefore, arc flash and fire-resistant coveralls complying with the EN 1149-5 standard are anti-static. These work clothes often use special materials or treatments to reduce static electricity build-up and reduce the risk of electrostatic discharge. This type of work clothes is typically used in jobs where it is necessary to prevent electrostatic discharge from causing harm to the surrounding environment or work items, such as petrochemical industry, electronic manufacturing and dust explosion hazardous environments. Work clothing that complies with the EN 1149-5 standard provides the wearer with safe protection in these environments.

• Model: BDP7607
• Size: S-M-L-XL-2XL-3XL-4XL
• Colour: Navy Blue/Orange/Black/Royal Blue/Grey
• FR Reflective tape in silver colour of 5cm.

  • One vertical strip on both the shoulders extending till waist , both front and back
  • One horizontal line across waist line
  • One on each arm and leg .

• Two chest pockets covered by flappers of the same fabric .
• One loop above each chest pocket .
• Two hip pockets.
• Pen Pocket two slots on left sleeves.
• Two rear pockets with flap.
• Heavy duty two - way brass zipper, metal press button and storm flap closure.
• Two covered snap closure at front of garment.
• Adjustable concealed snap closures on sleeve cuffs. Full sleeves garment.
• Backside elasticized waist.
• FR thread used throughout garment construction.
• Materials:Lenzing FR, Aramid, Anti-static, 185gsm
• Standrad:

  • NFPA 2112 UL Certification
  • ASTM F1959
  • IEC 61482-1-1
  • ISO 11612 A1/A2/B1/C1
  • EN1149-5

• Weight:ISO 3801:185gsm+5%
• Width:ISO 3932:150CM
• Tensile strength:ISO 13934-1:warp650N:weft550N
• Tear strenght:ISO 13937-2:warp30N:weft30N
• Shrinkage:ISO 6330:warp+3%:weft+3%
• Pilling resistance:ISO 12945-2:7000rubs:3
• Abrasion:ISO 12947-2:9Kpa:30000Cycles
• ARC Protection:ASTM F1959:atpv 9.7cal/cm2
• ARC Protection:IEC 61482-1-1:ATPV 10cal ELIM 5.8cal
• Inflammablility:EN 11612:A1A2B1C1
• Inflammablility:NFPA 2112:PASS UL Certified
• Antistatic:EN 1149-5:PASS
• Instructions for use:Protective clothing for industrial workers exposed to heat. Protects against brief contact with flame and against convective and radiant heat flame retardant. Superior Electric Arc and Flash Fire protection.
• Limits to use:Only use for the purposes described in the above instructions for use. Before donning this garment, check that it is clean and unused, otherwise performance may be affected. Check the seams, closures and that the fabric is intact. Do not use in the event of a defect.
• Instructions for storage:Store in its original packaging away from light and humidity.
• Instructions for cleaning / maintenance:

  • Wash separately in a Normal or Cotton cycle at any water temperature up to a maximum of 140ºF (60ºC). Use any typical home laundry detergent. Do not use soap (tallow soap containing animal fats).
  • Turn garments inside out before wash to reduce streaking from abrasion. Fill the washer no more than 2/3 full and use high water level.
  • DO NOT use chlorine bleach or liquid non-chlorine bleach.
  • Do not use starch or fabric softeners as they may coat fibers and mask FR performance and/or serve as fuel in the event of garment ignition.